Support
Why Fortnite Shows a Black Screen in OBS When Capturing the Game

Fortnite Black Screen in OBS: Causes and Game Capture Setup

Why OBS Doesn't See the Fortnite Image

A black screen in the "Game Capture" source means OBS isn't receiving the picture from the Fortnite process. The game itself may be running fine: you can hear the sound, the frame counter is displayed, but the OBS preview stays an empty frame. The cause is usually unrelated to streaming, the scene, or encoder settings.

Most often, capture breaks due to an incorrectly selected source, different permission levels for the programs, running on different graphics cards, or a conflict with an overlay. You shouldn't immediately reinstall OBS and Fortnite: this rarely helps and can mess up working scene, audio, and streaming settings.

Check the causes one by one and fully restart Fortnite after each change. The game may not update the way it outputs the image if you simply minimize it or return to the lobby.

Where to Start with a Black Screen in OBS

  1. Make sure the correct source is selected in the scene and isn't covered by another layer.
  2. Recreate "Game Capture" and try capturing a specific Fortnite window.
  3. Close OBS and Fortnite, then launch them with the same permissions.
  4. Check whether the game and OBS are running on the same graphics card.
  5. Change the display mode in Fortnite and restart the game.
  6. Temporarily disable overlays, recording programs, and frame counters.
  7. If "Game Capture" didn't work, use "Window Capture" or "Screen Capture."

This order lets you start with OBS settings and avoid changing system parameters unnecessarily. The downside of this check is that finding a conflict with an overlay or driver may take several game restarts.

Check the "Game Capture" Source in the Scene

Open the source properties in OBS. For diagnostics, select the capture mode for a specific window and choose Fortnite from the application list. If the game window isn't in the list, launch Fortnite, return to OBS, and reopen the source properties.

  • Delete the old "Game Capture" source and create a new one.
  • Check that the source is visible: the eye icon next to it must be enabled.
  • Move the source above the colored placeholders, images, and frames in the scene list.
  • Disable third-party overlays in the capture properties if the picture disappears along with them.
  • Don't duplicate multiple capture sources for the same game in one scene.

Capturing a specific window is easier to control: OBS connects specifically to Fortnite rather than to any full-screen application. The downside of this option is that the source may stop seeing the game after a display mode change, a client update, or the next launch.

Launch OBS and Fortnite with the Same Permissions

OBS may not get access to the image if Fortnite is running as administrator and OBS is in normal mode. The reverse situation can also cause the problem. Close both programs, then launch them with the same permission level and check the preview.

For a quick diagnostic, you can open OBS as administrator and then launch Fortnite. If the image appears, the cause was the programs' access to each other. After checking, set up a permanent launch option that suits your system.

The downside of launching with elevated permissions is that related applications may also require the same mode. This applies to programs with overlays, clip recording, hardware monitoring, and in-game notifications.

A streamer's workspace with Fortnite running on a monitor for setting up capture in OBS.

Set a Single Graphics Card for OBS and Fortnite

On laptops and computers with multiple graphics adapters, Fortnite may run on the discrete graphics card while OBS runs on the integrated one. In such a pairing, "Game Capture" sometimes doesn't receive the image even if the source is created correctly.

Open the system graphics settings and assign a single adapter for both Fortnite and OBS. Then fully close both programs and launch them again. If a discrete graphics card is used, both the game and OBS are usually assigned to it.

You can check this cause by a simple sign: "Game Capture" stays black, while "Screen Capture" shows the desktop and Fortnite without issues. This isn't absolute confirmation, but such a result points to a problem connecting to the game process rather than a scene error.

The downside of setting everything to one discrete adapter is that the overall load on the graphics card increases. With little performance headroom, you may see frame drops in Fortnite or rendering overload in OBS.

Check the Display Mode in Fortnite

In Fortnite's video settings, switch the display mode between fullscreen, windowed fullscreen, and windowed mode. After changing the parameter, exit the game completely and launch it again. Simply switching in the lobby doesn't always change the way the system outputs the image.

You can check whether the display mode is to blame by comparison. First launch Fortnite in one mode and look at the "Game Capture" source. Then change only the display mode, restart the game, and repeat the check. If the picture appears or disappears with the same permissions, scene, and graphics card, the cause is related to this mode or its combination with the driver and overlays.

Windowed fullscreen mode is often more convenient for capture and quick switching between programs. Its downside is potentially less stable performance. Exclusive fullscreen sometimes gives better response and frame rate but can conflict with capture or programs on top of the game.

Disable Overlays and Other Capture Programs

Overlays, FPS counters, clip recording programs, image filters, and other capture tools can connect to the Fortnite process at the same time. As a result, OBS gets a black frame, a frozen image, or captures the game only after several restarts.

  • Temporarily disable in-game overlays and in-game performance counters.
  • Close other programs for screen recording and saving clips.
  • Turn off filters that change colors, sharpness, or the game interface.
  • Disable frame monitoring if it's displayed on top of Fortnite.
  • After each disabled application, restart Fortnite and check the OBS source.

If the picture appeared in a clean launch, enable the programs one by one. When the black screen returns, the last enabled application will be the likely cause of the conflict. You don't have to remove it permanently: sometimes it's enough to turn off its overlay or recording function.

The downside of this diagnostic is obvious: during the check, you'll lose quick clips, notifications, load indicators, and other familiar tools. But this method helps separate a third-party software conflict from OBS or Fortnite issues.

Use Window Capture or Screen Capture

If "Game Capture" doesn't show Fortnite, add a "Window Capture" source and select the game window. This method doesn't always work with fullscreen mode, but it's suitable for checking: if the window is captured, OBS generally sees the Fortnite image.

When "Window Capture" doesn't help either, use "Screen Capture" or Display Capture. This source transmits the entire monitor, so it usually works even with problems connecting to the game process. Before streaming, crop the excess area in the scene, set the required resolution, and check the recording.

"Screen Capture" is a working fallback, but it can show personal windows and notifications. When you minimize Fortnite, viewers will see the desktop, browser, messages, or other applications on the selected monitor.

To reduce the risk, output the game to a separate display, disable notifications, and don't open extra windows during the stream. The downside of screen capture is less control over the frame content: everything that appears on the monitor can potentially end up in the broadcast.

Check Updates and Settings After Changing the System

If the black screen appeared after updating Fortnite, OBS, the graphics card driver, or the system, first repeat the basic check of the source, permissions, and display mode. After updates, the graphics card assignment for the application, the OBS launch mode, or capture settings may reset.

Don't change all settings at once. Create a separate test scene with a single capture source and check it without browser widgets, filters, and complex design elements. If Fortnite displays in the test scene, add the remaining sources gradually. This makes it easier to find the layer or plugin after which the preview turns black again.

Last Articles

New website design

What has changed in design and functionality We have updated the website to make working with it faster and more convenient. The main changes affect ..

15/08/2026 New

News SP

Good afternoon, I've collected all the news during this time.: 1. The main news is that prices for twitch viewers have been greatly reduced, while Tw..

08/04/2026 Update

We have collected all current promotions and giveaways for you until 01.01.2026

1. Use promo code "December2025" for a 15% discount for all our viewers2. We have reduced the base prices for our configurator and the most affordable..

26/12/2025 Ended

Cooperation with squads and resellers

Twitch services are working stably, so we are ready to cooperate with squads, resellers, service owners, bot owners, and many others.Individual te..

22/10/2025 For partners

Twitch viewers are stable, but there are some nuances.

We have completely updated our Twitch viewer services, and they are now working stably. We only use high-quality IP addresses for the viewers.The ..

22/10/2025 Update

Twitch Viewer Configurator and Control Panel

Hello everyone! Today, we are announcing a new feature—"Twitch Viewer Configurator". Now, you can customize any plan for your Twitch channel. Choo..

15/06/2025 New

If YouTube is blocked, where to stream now?

Greetings, I have compiled a guide for streamers, which will be very relevant at the moment. Now YouTube and twitch have disabled monetization from vi..

16/03/2022 Important

Reseller Panel API SP

We have finally developed the APINow it will be more convenient for our partner sites to work with us.To update the maximum tariffs for YouTube, an up..

02/09/2021 For partners

PARTNERS AND REFERRALS: NEW TERMS!

Due to the huge popularity of the partnership services and referral program, we have made a cooperation table. The essence is very simple: more live a..

12/08/2020 For partners

Viewer control panel [Twitch | Kick | YouTube | VK Video Live]

Build your own custom plan
Deposit funds, one-click order, discounts and bonuses are available only for registered users. Register.
If you didn't find the right service or found it cheaper, write to our support in Telegram or chat, and we will resolve any issue.
New

Telegram bot @BOT_SP_RU_BOT

Order or repeat in a minute, balance and order statuses — right in Telegram

Repeat orderOrder statusesBalance top-upPromo codes