Support
Why Capture Card Audio Lags Behind Video in OBS

Capture Card Audio Lags Behind Video in OBS

What Audio and Video Desync Looks Like

When capturing a console, a second PC, or a camera, the image in OBS may run ahead of the sound: the character is already opening their mouth, but the line is heard a fraction of a second later. Sometimes the problem is only noticeable in the recording or on the stream, even though everything looks fine in the preview. It's important to separate these: delay in your headphones, delay in OBS, and desync in the final broadcast can have different causes.

First, check the recording locally. Make a short clip with a clap on camera, a menu button press, or another sharp action where it's easy to match the picture and the sound. If the audio in the file is also late, you need to look for the problem in the sources and OBS settings. If the file is in sync and the lag is only audible to you, the issue is usually in monitoring.

Why the Capture Card Processes Audio Separately

The capture card receives the HDMI signal, decodes the video, and passes it to OBS via USB or another interface. The audio track may go through a separate buffer, driver, or output device. When video and audio are buffered differently, an offset appears. The more processing between the source and OBS, the higher the chance of getting a desync.

Delay is affected by the card's mode, resolution, frame rate, HDR, audio conversion, and connection stability. The problem isn't always related to OBS: the card may already be transmitting a delayed audio signal. In that case, changing filters or the stream bitrate won't fix the situation.

Check Where OBS Gets the Card's Audio From

One common cause is that the video is added as a "Video Capture Device" source, while the audio reaches OBS by a different path. For example, the picture comes from the capture card, but the audio comes through the system input, a virtual mixer, the line-in jack, or a separate USB device. These paths have different delays, so they don't have to match.

  • Open the properties of the video capture source and check whether audio capture through this device is enabled.
  • Check OBS "Settings," the audio section: the capture card shouldn't be added both as a global device and as audio within the source itself.
  • In the mixer, make sure there aren't two channels with the same game sound.
  • Disable the extra audio sources one by one and make a test recording.

Using audio directly from the card's source usually simplifies synchronization. The downside of this option is that the audio settings may be limited by the card's driver, and not all devices reliably output sound this way.

Rule Out Double Capture of the Same Audio Signal

Two nearly identical channels don't just create an echo. If one of them is delayed more, it may seem like all the audio lags behind the picture or sounds blurry. This happens when the capture card is selected both in OBS's global audio devices and in the video capture properties. Another typical scenario is capturing desktop audio and card audio at the same time.

Leave only one path for the game audio. After that, record a test clip again. Don't rely only on the mixer indicators: they show that there's a signal, but not its timing relative to the video.

Set Up the Sync Offset in OBS

When the source works stably but the audio consistently lags by the same amount, use the sync offset. In the OBS mixer, open the advanced audio properties and find the delay field for the channel you need. The value adds delay to the audio, so it's suitable when the audio arrives before the image.

If the audio is the one lagging, you can't simply add a delay in this field: that will make the problem worse. In that case, you need to either delay the video or reduce the delay on the audio path side. To delay the image, use a video delay filter or add processing to the video channel through a suitable source.

The offset fixes a constant desync, but it doesn't help if the delay changes during the stream. The downside of manual adjustment is that after changing the resolution, card mode, driver, or frame rate, the value may become incorrect.

How to Determine the Direction of the Delay

You shouldn't set up synchronization based on how it feels during gameplay. Record a few seconds with a visual and audio marker. A clap in front of the camera, an object hitting the table on camera, or a test clip with a timecode will work. Open the recording in an editor where you can compare the moment of the event and the peak of the sound wave frame by frame.

  1. If the sound is heard before the visual event, delay the audio in OBS's advanced properties.
  2. If the image appears before the sound, delay the video or look for extra audio buffering.
  3. If the offset appears and disappears, check the USB, driver, system load, and duplicate sources.

You shouldn't adjust the audio only for your own monitoring: viewers may be hearing a different version of the signal.

Check the Sample Rate of the Devices

A different sample rate on the capture card, Windows, and OBS can cause unstable synchronization. This is especially noticeable on long streams: everything looks fine at the start, but after a while the audio gradually drifts. Check the recording and playback device settings in the system, then the OBS audio settings.

For all related devices, it's desirable to choose the same sample rate mode that the capture card and audio interface support. After changing it, restart OBS and make a new test recording. The downside of this method is that some cards lock in their own mode and don't allow it to be changed in Windows.

Account for Headphone Monitoring Delay

If you listen to the game through "Monitor and Output" in OBS, the sound goes through the program, buffers, and the playback device. In your headphones it may lag noticeably, even though the recording for viewers stays in sync. This isn't always a capture card error.

For gaming, people usually use the card's HDMI output, direct output from the console, a mixer, or the headphone jack on the card itself, if it has one. Direct monitoring reduces latency. Its downside is that the sound may bypass OBS, so levels, filters, and source muting in the program won't affect what you hear.

Check the USB Connection and Card Power

Capture cards are sensitive to an unstable USB connection. If the device is connected through an overloaded hub, a long cable of questionable quality, or a controller shared with drives and webcams, audio and video may arrive in bursts. On the surface, the picture sometimes remains acceptable, but the audio starts to shift or drop out.

  • Connect the card directly to a computer port, without an intermediate hub.
  • Use a cable rated for the required data transfer mode.
  • Disconnect other resource-intensive USB devices during the test.
  • Reconnect the card after starting OBS and compare the result with the previous recording.

A direct connection doesn't guarantee a fix if the cause is the driver or the card itself. But it helps rule out bus instability before more complex configuration.

Disable Extra Audio Processing

Virtual mixers, noise reduction plugins, VST filters, driver effects, and audio routing programs add buffers. A single effect rarely creates critical delay, but a chain of several processing steps is quite capable of shifting the audio relative to the HDMI video.

Temporarily disable the filters on the capture card channel, virtual devices, and software sound enhancements in the system. Check the recording in a clean configuration. Then bring the elements back one at a time. The downside of this diagnostics is that during the test you'll lose your usual processing, such as compression or noise reduction.

When the Problem Only Appears After Starting the Stream

If the test recording is in sync but the desync appears during the broadcast, check the CPU, GPU, and drive load. Overload doesn't necessarily cause the same delay in all sources: OBS may drop frames while the audio continues on its own buffer. Separately, check whether the capture source's frame rate changes when the game starts.

Reduce the load on the scene: temporarily remove heavy browser sources, animations, extra cameras, and filters. The downside is that the scene will become simpler, and some of the visuals or automation will have to be disabled. If synchronization stabilizes after that, bring the elements back gradually and watch for the moment the problem appears.

When to Update the Driver or Change the Capture Mode

After updating the system, OBS, or the capture card driver, the device's behavior may change. Install the latest driver from the card manufacturer's official page, restart the computer, and repeat the test. If the problem started right after an update, it's useful to check whether the resolution, frame rate, HDR, and audio format settings have changed.

You can also temporarily choose a simpler capture mode: disable HDR, lower the resolution or frame rate if the card and USB interface are running at their limit. The downside is that the signal quality or image smoothness will decrease. This test isn't meant as a permanent setting, but to understand whether the delay is related to the load on the device.

Last Articles

New website design

What has changed in design and functionality We have updated the website to make working with it faster and more convenient. The main changes affect ..

15/08/2026 New

News SP

Good afternoon, I've collected all the news during this time.: 1. The main news is that prices for twitch viewers have been greatly reduced, while Tw..

08/04/2026 Update

We have collected all current promotions and giveaways for you until 01.01.2026

1. Use promo code "December2025" for a 15% discount for all our viewers2. We have reduced the base prices for our configurator and the most affordable..

26/12/2025 Ended

Cooperation with squads and resellers

Twitch services are working stably, so we are ready to cooperate with squads, resellers, service owners, bot owners, and many others.Individual te..

22/10/2025 For partners

Twitch viewers are stable, but there are some nuances.

We have completely updated our Twitch viewer services, and they are now working stably. We only use high-quality IP addresses for the viewers.The ..

22/10/2025 Update

Twitch Viewer Configurator and Control Panel

Hello everyone! Today, we are announcing a new feature—"Twitch Viewer Configurator". Now, you can customize any plan for your Twitch channel. Choo..

15/06/2025 New

If YouTube is blocked, where to stream now?

Greetings, I have compiled a guide for streamers, which will be very relevant at the moment. Now YouTube and twitch have disabled monetization from vi..

16/03/2022 Important

Reseller Panel API SP

We have finally developed the APINow it will be more convenient for our partner sites to work with us.To update the maximum tariffs for YouTube, an up..

02/09/2021 For partners

PARTNERS AND REFERRALS: NEW TERMS!

Due to the huge popularity of the partnership services and referral program, we have made a cooperation table. The essence is very simple: more live a..

12/08/2020 For partners

Viewer control panel [Twitch | Kick | YouTube | VK Video Live]

Build your own custom plan
Deposit funds, one-click order, discounts and bonuses are available only for registered users. Register.
If you didn't find the right service or found it cheaper, write to our support in Telegram or chat, and we will resolve any issue.
New

Telegram bot @BOT_SP_RU_BOT

Order or repeat in a minute, balance and order statuses — right in Telegram

Repeat orderOrder statusesBalance top-upPromo codes